Jonathan Yarden
Year of production: 2004, 2005, 2006, 2007, 2008
Passenger compartment fuse panel / power distribution box
The fuse panel is located under the right-hand side of the instrument panel.
№ | A | Fuse Description |
1 | 10 | Run/Accessory – Wipers, Instrument cluster, Audio for XL/STX |
2 | 20 | Stop/Turn lamps, ABS, T/T electric brake module, PCM (BOO signal), turn signal mirrors, CHMSL |
3 | 7.5 | Power mirrors, Memory seats and pedals |
4 | 10 | DVD battery power, Power fold mirror |
5 | 7.5 | Keep alive memory for Powertrain Control Module (PCM) and Climate control module |
6 | 15 | Parklamps, Body Security Module (BSM), Instrument panel illumination |
7 | 5 | Radio (start signal) |
8 | 10 | Heated mirrors, Switch indicator |
9 | 20 | Fuel pump relay, Fuel injectors, Injector sense |
10 | 20 | Trailer tow back-up lamps relay, Trailer tow parklamp relay |
11 | 10 | A/C clutch, 4×4 solenoid |
12 | 5 | PCM relay coil |
13 | 10 | Climate control module power, Flasher relay |
14 | 10 | Back-up lamp and Daytime Running Lamps (DRL) relay coil, A/C pressure switch, Redundant speed control switch, Heated PCV (5.4L), ABS |
15 | 5 | Overdrive cancel, Cluster |
16 | 10 | Brake-shift interlock solenoid |
17 | 15 | Fog lamp relay |
18 | 10 | Electrochromatic mirror, Heated seats, BSM, Compass, RSS (Reverse Sensing System), Power rail |
19 | 10 | Restraints (Airbag module) |
20 | 10 | Power rail |
21 | 15 | Cluster keep alive power |
22 | 10 | Delayed accessory power for audio, power door lock switch and moon roof switch illumination |
23 | 10 | RH low beam headlamp |
24 | 15 | Battery saver power for demand lamps, Flex fuel |
25 | 10 | LH low beam headlamp |
26 | 20 | Horn |
27 | 5 | Passenger Airbag Deactivation (PAD) warning lamp, Cluster airbag warning lamp |
28 | 5 | SecuriLock transceiver (PATS), PCM IGN monitor |
29 | 15 | PCM 4×4 power |
30 | 15 | PCM 4×4 power |
31 | 20 | Radio power, Satellite radio module |
32 | 15 | Vapor Management Valve (VMV), A/C clutch relay, Canister vent, Heated Exhaust Gas Oxygen (HEGO) sensors #11 and #21, CMCV, Mass Air Flow (MAF) sensor, Variable Cam Timing (VCT), Heated Positive Crankcase Ventilation (PCV) valve (4.2L engine), CID sensor (4.2L engine), 4.6L/4.2L EGR |
33 | 15 | Shift solenoid, CMS #12 and #22, Ignition coils |
34 | 15 | PCM power, IMRC (4.2L) |
35 | 20 | Instrument cluster high beam indicator, High beam headlamps, DRL disable relay |
36 | 10 | Trailer tow right turn/stop lamps |
37 | 20 | Rear power point |
38 | 25 | Subwoofer power |
39 | – | Not used |
40 | 20 | Low beam headlamps, DRL |
41 | – | Not used |
42 | 10 | Trailer tow left turn/stop lamps |
101 | 30 | Starter solenoid |
102 | 20 | Ignition switch feed |
103 | 20 | ABS valves |
104 | – | Not used |
105 | 30 | Electric trailer brakes |
106 | 30 | Trailer tow battery charge |
107 | 30 | Power door locks (BSM) |
108 | 30 | Passenger power seat |
109 | 30 | Driver power seat, Adjustable pedals, Memory module (pedals, seats) |
110 | 20 | Cigar lighter, Diagnostic connector power |
111 | 30 | 4×4 motor relays |
112 | 40 | ABS pump power |
113 | 30 | Wipers and washer pump |
114 | 40 | Heated backlite, Heated mirror power |
115 | 20 | Moonroof |
116 | 30 | Blower motor |
117 | 20 | Instrument panel power point |
118 | 30 | Heated seats |
401 | 30 | Delayed accessory power: Power windows, Power sliding backlite |
R01 | Full ISO relay | Starter solenoid |
R02 | Full ISO relay | Accessory delay |
R03 | Full ISO relay | Hi-beam headlamps |
R04 | Full ISO relay | Heated backlite |
R05 | Full ISO relay | Trailer tow battery charge |
R06 | Full ISO relay | Blower motor |
R201 | Full ISO relay | Trailer tow park lamps |
R202 | Full ISO relay | Fog lamps |
R203 | Full ISO relay | PCM |
R301 | Printed circuit boar | Trailer tow backup lamps |
R302 | – | Not used |
R303 | Printed circuit boar | Fuel pump |
R304 | Printed circuit boar | Battery saver |
R305 | Printed circuit boar | Horn |
Auxiliary relay box
The relay box is located in the engine compartment on the left fender.
With Daytime Running Lamp (DRL) or 4×4 options
Without Daytime Running Lamp (DRL) and 4×4 options
№ | A |
Description |
F03 | 5 | Clockspring illumination |
R01 | Full ISO Relay | 4×4 CCW |
R02 | Full ISO Relay | 4×4 CW |
R03 | ½ ISO Relay | Daytime Running Lamps (DRL) high beam disable |
R201 | Relay | DRL |
R202 | Relay | A/C clutch |
D01 | Diode | A/C clutch |
D02 | Diode | One Touch Integrated Start (OTIS) |
WARNING: Terminal and harness assignments for individual connectors will vary depending on vehicle equipment level, model, and market.