Jonathan Yarden
Year of production: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Location
Left-hand drive
Right-hand drive
A – Pre-fuse box
B – Standard relay box
C – Passenger compartment junction box
D – Engine compartment junction box
Pre-fuse box
No. |
A |
Circuits protected |
1 | 350 | Starter motor and alternator |
2 | 60 | Passenger junction box power supply – start relevant / Passenger junction box KL15 for Start-Stop |
3 | 100 | Engine junction box power supply – non-start relevant |
4 | 40 | Heated front screen right-hand side |
5 | 100 | Standard relay box power supply – non-start relevant |
6 | 40 | Heated front screen left-hand side |
7 | 60 | Passenger junction box power supply – non-start relevant |
8 | 60 | Customer connection point |
9 | 60 | Customer connection point |
10 | 60 | Customer connection point |
Relay | ||
R1 | Second battery disconnect switch |
Engine junction box
No. |
A |
Circuits protected |
11 | 60 | Engine cooling fan |
12 | 30 | Trailer tow and trailer tow module power supply (KL30) |
13 | 40 | ABS and ESP pump |
14 | – | Not used |
15 | 60 | Glow plugs |
16 | 60 | Ignition relay (KL15 #3 |
17 | 30 | Starter enable |
18 | 40 | Ignition feed (KL15) to Passenger junction box (vehicles without Start-Stop) |
18 | – | Not used (vehicles with Start-Stop) |
19 | – | Not used |
20 | 10 | ABS, ESP, steering angle sensor, YAW sensor supply (KL30) |
21 | 25 | ABS and ESP valves and control unit |
22 | – | Not used |
23 | – | Not used |
24 | 5 | Fuel pump (without fuel-fired heater) |
24 | 20 | Fuel pump (with fuel-fired heater) |
25 | – | Not used |
26 | 15 | PCM Power |
27 | 5 | Fuel pump (with fuel-fired heater) |
28 | 5 | T-MAF sensor |
29 | 5 | Vaporiser glow plug monitoring |
30 | 7.5 | Sonic purge valve |
31 | 15 | VAP pump/UEGO |
32 | 20 | Vaporiser glow plug |
33 | 10 | Reversing lamps |
34 | 20 | Trailer KL15 Power supply |
35 | – | Not used |
36 | 10 | Air conditioning clutch |
37 | – | Not used |
Relay | ||
R2 | Glow plugs | |
R3 | Trailer tow (KL15) | |
R4 | Starter enable | |
R5 | Power feed (KL15 #4) | |
R6 | Power feed (KL15 #3) | |
R7 | Fuel pump | |
R8 | Vaporiser glow plug | |
R9 | Not used | |
R10 | Air conditioning clutch solenoid |
Standard relay box
No. |
A |
Circuits protected |
38 | 20 | Rear window wiper |
39 | 10 | Front and rear air conditioning control |
40 | 5 | Not used |
41 | 5 | Tachograph |
42 | 5 | Headlamp levelling, master light switch (KL15) |
43 | 20 | Heated front seats |
44 | 20 | Horn |
45 | 20 | Auxiliary power point front |
46 | 10 | Heated door mirrors, if CAT 1 fitted |
47 | 20 | Cigar lighter |
48 | 5 | Relay coils supply, power mirrors |
49 | 20 | Auxiliary power point rear |
50 | 10 | Main beam left-hand side |
51 | 10 | Main beam right-hand side |
52 | 10 | Dipped beam left-hand side |
53 | 10 | Dipped beam right-hand side |
54 | 30 | Pre-fuse for dipped beam, main beam, daytime running lamps, tachograph, fuel-fired booster heater blower |
55 | 40 | Heater blower motor |
56 | 20 | Power windows |
57 | 30 | Rear heater blower motor |
58 | 30 | Front wiper motor |
59 | 30 | Heated rear window, heated door mirrors |
60 | – | Not used |
61 | 60 | Ignition relay (KL15 #1) |
62 | 60 | Ignition relay (KL15 #2) |
Relay | ||
R11 | Headlamp dip beam | |
R12 | Heated door mirrors (if CAT 1 alarm is fitted), power outlet (if CAT 1 alarm is not fitted) | |
R13 | Headlamp main beam | |
R14 | Horn | |
R15 | Daytime running lamps | |
R16 | Programmable fuel fired heater | |
R17 | Heated rear windows and heated door mirrors (or heated rear window left-hand side if Cat 1 alarm is fitted) | |
R18 | Heated rear window right-hand side if Cat 1 alarm is fitted | |
R19 | Power feed (KL15 #2) | |
R20 | PJB KL15 (Start-Stop only) | |
R21 | Power feed (KL15 #1) | |
R22 | Heated windscreen right-hand side | |
R23 | Windscreen wiper high and low function | |
R24 | Rear window wiper | |
R25 | Windscreen wiper on and off function | |
R26 | Heated windscreen left-hand side |
Passenger junction box
No. |
A |
Circuits protected |
63 | 5 | Rear parking aid, rain sensor |
64 | 2 | Acceleration pedal demand sensor |
65 | 15 | Brake lamp switch |
66 | 5 | Instrument cluster, PATS supply, tachograph, instrument panel switch illumination |
67 | 15 | Washer pump |
68 | 10 | Restraints control module |
69 | 20 | Exterior lamp switch (KL15) |
70 | 20 | Battery backed sounder |
71 | 5 | Exterior lamp switch (KL30) |
72 | 10 | Battery saver supply, OBDII (KL30) |
73 | 15 | Radio, navigation unit and phone supply |
74 | 5 | Instrument cluster, fuel-fired booster heater timer, remote keyless entry supply, interior motion sensor (KL30) |
75 | 7.5 | Side lamps right-hand side |
76 | 7.5 | Side lamps left-hand side |
77 | 5 | Ignition switch supply, battery disconnect switch coils supply |
78 | 15 | Central locking |
79 | 7.5 | Number plate lamp, side markers |
80 | 15 | Front fog lamps |
81 | 10 | Rear fog lamps |
82 | 3 | Audio and instrument cluster ignition feed |
Auxiliary fuses
No. |
A |
Circuits protected |
Location |
83 | 10 | Trailer tow module | Left-hand side footwell |
84 | 7.5 | DPF glow plug sensing | Below the engine compartment junction box |
WARNING: Terminal and harness assignments for individual connectors will vary depending on vehicle equipment level, model, and market.